Contact Us

Qingdao Xinrunju Machinery Co.,Ltd

Address:Wangtai Town, Qingdao, China



how to maintenance Water jet loom

- Jul 18, 2017 -

Water jet loom maintenance skills: the basic operation: 1 - see, 2 - judgment, 3 -

 ⑴ under the first head hairiness, check the first scissors or diaper blade is sharp and smooth.

 ⑵ stop when the thread weft, look at the first head of the head is hooked on the opening or the next, the water line under the transfer, the next anti.

 ⑶ under the first short weft, see the size of P and water cut size. 9MM spring 1 circle is equal to 4.23KG P value; 9.5MM spring 1 circle is equal to 5.3KG P value. Water cut is to view the waterline by the fine side when the rough, about 145-185 or so. 20-30D nylon arm of the water to cut small, the first is not easy to hair, nylon sand P value to be large, washed on the hairiness of the latitude in the free flight angle in the safe flying! Mechanical restraint angle to control, restraint angle and the proportion of water to the control of the CC to 0-30 degrees or so, too short will be short sand, small will be short, the first water will lead to long water dry, Stop and weave stock broken sand; too short transport force is not short weft!

 ⑷ basic process is not up to the standard, the machine is easy to hair and downtime. Different warp D number of beams have different levels, the roller has a different angle, different tension! Different Daxa D with different spray groups, different types of water pump sets, and different weft setting! It is best to buy a special tool for maintenance: flash device

Previous: six kinds of wear law about Scarf Next: How to find high quality shade net

Related Industry Knowledge

Related Products